TXT
묘사:
Directional Coupler
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 8.938 inches and 9.063 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
Between 1.814 inches and 1.938 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 2.938 inches and 3.063 inches
MRC:
The number of complete cycle changes of radiated electromagnetic energy,per unit of time,for which an item is rated.ANKZ
Radio Frequency Rating:
Between 216.0 megahertz and 450.0 megahertz
MRC:
Indicates the design type of the item.APGF
Design Type:
Bidirectional
MRC:
Indicates the type of unit.APQB
Unit Type:
Transmission line
MRC:
The maximum to minimum voltage standing wave ratio at a specified frequency/ies/.BGPS
Voltage Standing Wave Ratio At Reference Frequency:
1.1 to 1 at 216 to 450 mhz
MRC:
The nomenclature by which the terminal fitting is identified.BGPY
Terminal Fitting Name:
Coaxial, connector
MRC:
The name of the government agency or commercial organization that controls the terminal fitting.BGPZ
Terminal Fitting Controlling Agency:
Military specification
MRC:
An identifying number assigned by the government agency or commercial organization controlling the terminal fitting.BGQB
Terminal Fitting Identifying Number:
Mil-c-39012
MRC:
An indication of the designed use of the terminal fitting.BGQC
Terminal Fitting Usage Design:
Main line
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
81349-mil-c-15370 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
