부품 정보
Sterilizer surgical instrument & dressing120/240v ac press steam
TXT
묘사:
Surgical Instrument A Sterilizer
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
10.000 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
20.500 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
15.500 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
19.750 inches
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
A measurement of the longest inside dimension of an item,in distinction from width.ADJU
Inside Length:
16.000 inches
MRC:
The name and number of parts supplied with the item which may be required for application.AKYD
Accessory Components And Quantity:
Two instrument trays are provided
MRC:
The value(s) of potential for which the item is rated.AMSE
Voltage Rating:
220.0 volts or 240.0 volts
MRC:
The number of individual motors provided.AZCJ
Individual Motor Quantity:
1
MRC:
Indicates the type of current required to operate the motor.AZKJ
Motor Current Type:
Ac
MRC:
The total electrical voltage of the motor,expressed in volts.AZKK
Motor Voltage In Volts:
120.0
MRC:
The means by which the heat is transferred.BRXN
Heat Transfer Method:
Pressure steam
MRC:
The means provided to close the opening of the item.CPMD
Closure Method:
Manually operated door with left hand hinge. Microswitch prevents inadvertent start of cycle before door is locked
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Steris ten sixteen tabletop steam sterilizer; uses distilled or deionized water only; four preprogrammed cycle selections on a large control panel
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, stainless
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel
