MRC:
Indicates the type of hole/s/ in the tongue.AAAL
Tongue Hole Type:
Round, unthreaded and oblong
MRC:
The environmental elements or conditions that the cushioning is designed or protected to resist or withstand satisfactorily.AAAP
Cushioning Environmental Protection:
Oil resistant and heat
MRC:
The distance,measured along a straight line perpendicular to the longitudinal axis of the slot,from one edge to the other.ABGC
Slot Width:
0.406 inches
MRC:
A measurement of the longest dimension of the slot,in distinction from width.ABGD
Slot Length:
0.500 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
0.750 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
0.406 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
0.050 inches
Center To Center Distance Between Loop And Mounting Hole:
0.937 inches
Distance From Loop Center To Tongue End:
1.312 inches
MRC:
The length of a straight line which passes through the center of the loop,and terminates at the inside circumference.BZTN
Loop Inside Diameter:
0.812 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber silicone class q cushion
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel band or steel comp 1008 band or steel comp 1009 band or steel comp 1010 band or steel comp 1011 band or steel comp 1012 band or steel comp 1013 band or steel comp 1015 band or steel comp 1016 band or steel comp 1017 band or steel comp 1018 band or steel comp 1019 band or steel comp 1020 band or steel comp 1014 band
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm d2000 assn standard single material response cushion
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm-a-109 assn standard single material response band or sae assn standard single material response band
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium band and chromate band or zinc band and chromate band
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-416, ty2, cl3 federal specification 1st treatment response band or qq-z-325, ty2, cl3 federal specification 2nd treatment response band
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Single loop