부품 정보
Illumination through top of knob, shaft accommodation hole counterbored, 0.470 in. Min dia, 0.530 in. Maximum dia, 0.235 in. Min depth, 0.255 in. Maximum depth
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
Between 0.250 inches and 0.255 inches
MRC:
The number of setscrew holes included on the item.ABFR
Setscrew Hole Quantity:
1
MRC:
The distance from the center of the hole to the base of the knob or base of skirt if with integrally molded skirt.ABFU
Distance From Hole Center To Knob/skirt Base:
Between 0.340 inches and 0.360 inches
MRC:
An overall measurement between specified points of an item,in distinction from height.ABFY
Overall Depth:
Between 0.720 inches and 0.740 inches
MRC:
The texture of that portion of the item which is designed to be grasped.ABHG
Gripping Surface Condition:
Smooth
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the shaft accommodation.ABHH
Shaft Accommodation Style:
Flatted one side
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 1.470 inches and 1.530 inches
MRC:
A visible tracing or impression,and the like,of alpha and/or numeric characters,symbols,and the like.ABSP
Reference Marking:
Line
MRC:
The means used to attach the item.ABSX
Attachment Method:
Setscrews
MRC:
An inside measurement taken at right angles to the length of an item,in distinction from thickness.ADJT
Inside Width:
Between 0.220 inches and 0.225 inches
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.ADUM
Overall Thickness:
Between 0.770 inches and 0.830 inches
MRC:
Indicates the type of drive provided for turning,rotating,or positioning the screw.CBSC
Screw Drive Type:
Hexagon socket
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
32 screw hole
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.164 inches screw hole
MRC:
Indicates whether or not the pointer is designed as an integral part of the item.CSKT
Pointer Design:
Nondetachable
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Round with single pointed bar face
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unc screw hole
