부품 정보
Eight cooling fins on cylinder od
TXT
묘사:
Reciprocating Compresso Cylinder
MRC:
The basic material of which the body is fabricated.AAFZ
Body Material:
Iron, cast
MRC:
The provision/s/ for mounting the item.ABDR
Mounting Provision:
Threaded mounting holes
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
5.250 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
3.500 inches
MRC:
A measurement of the longest straight line across a circular cross-sectional plane.ADAV
Overall Diameter:
4.750 inches
MRC:
The longest distance between mounting centers parallel to the horizontal plane.AFDS
Longest Horizontal Distance Between Mounting Centers:
3.500 inches
MRC:
The longest distance between mounting centers parallel to the vertical plane.AFDV
Longest Vertical Distance Between Mounting Centers:
3.375 inches
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance,and an external or internal threaded mounting facility.AKBM
Mounting Facility Thread Class:
2b
MRC:
The direction of the threads of a mounting facility when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AKBN
Mounting Facility Thread Direction:
Right-hand
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting provision(s).BBBW
Mounting Provision Arrangement Style:
Four hole rectangular
MRC:
The means of cooling used to maintain the required operating temperature of the item.BFMF
Cooling Method:
Air to air cooled
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale applied to a mounting facility diameter.CDTD
Mounting Facility Thread Series Designator:
Unc
MRC:
The length of a straight line which passes through the center of the mounting facility which would bound the crest of an external thread or the root of an internal thread.CDTF
Mounting Facility Thread Diameter:
0.375 inches
MRC:
The number of threads on the mounting facility per linear inch measured on a line parallel to the thread axis.CDTG
Mounting Facility Thready Qty Per Inch (tpi):
16
MRC:
Indicates the type of mounting and the location on the item.CLML
Mounting Type And Location:
Flange center section
MRC:
The length of the threaded portion of the mounting facility.CLMN
Mounting Facility Thread Length:
0.500 inches
