부품 정보
Fifthhole2.773in.Alonglength2.326in.Alongwidth
TXT
묘사:
Junction Box Cover
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
7.170 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.335 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
6.889 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.188 inches
First Center To Center Distance Between Mounting Holes:
6.438 inches
Second Center To Center Distance Between Mounting Holes:
6.156 inches
MRC:
The number of holes provided to attach the cover.AELW
Cover Mounting Hole Quantity:
5
Distance From Center Of Mounting Hole To Edge Along The Width:
0.366 inches
Distance From Center Of Mounting Hole To Edge Along The Length:
0.366 inches
MRC:
Indicates the type of cover as distinguished by its particular design.AFER
Cover Type:
Blank
MRC:
The means provided for attaching the cover.AFFG
Cover Attachment Method:
Screw accommodation
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum cover
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Enamel cover
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
98230-ce223273 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
