부품 정보
0.093 in. Diameter drilled 0.245 in. From shoulder parallel to head wrench flats
TXT
묘사:
Headed Shoulder Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Round w/wrench flats
Under Head Length:
Between 4.475 inches and 4.485 inches
First Step Diameter:
Between 0.497 inches and 0.499 inches
First Step Length:
Between 3.995 inches and 4.005 inches
Second Step Diameter:
Between 0.449 inches and 0.450 inches
Second Step Length:
Between 0.470 inches and 0.490 inches
First End Taper Length:
0.030 inches
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
Between 0.631 inches and 0.632 inches
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
36.0 rockwell c and 40.0 rockwell c
First End Taper Angle:
45.0 degrees
Pin Head Diameter:
0.750 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.485 inches and 0.490 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp e4340 or steel comp 2340
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Shoulder
