TXT
묘사:
Flexible Shaft Coupling
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
6.063 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
7.188 inches
MRC:
The length of a straight line which passes through the center of the smallest circular cross section of the tapered portion,and terminates at the circumference.ABQA
Taper Minor Diameter:
1.6270 inches second end
MRC:
The length of a straight line which passes through the center of the smallest circular cross section of the tapered portion,and terminates at the circumference.ABQA
Taper Minor Diameter:
1.8750 inches first end and 1.8755 inches first end
MRC:
A measurement taken at right angles to the length of a keyway,in distinction from thickness.ABRR
Keyway Width:
0.500 inches second end
MRC:
A measurement taken at right angles to the length of a keyway,in distinction from thickness.ABRR
Keyway Width:
0.619 inches first end and 0.621 inches first end
MRC:
A measurement from the top surface to the bottom of the keyway groove.ABRV
Keyway Depth:
0.2357 inches first end
MRC:
A measurement from the top surface to the bottom of the keyway groove.ABRV
Keyway Depth:
0.2500 inches second end
MRC:
A measurement of the longest dimension of a bore.ADGE
Bore Length:
2.4380 inches second end
MRC:
A measurement of the longest dimension of a bore.ADGE
Bore Length:
1.9380 inches first end
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Tapered both ends
MRC:
Indicates the design type of the item.APGF
Design Type:
Internal gear
MRC:
The number of keying facilities provided.BSGH
Keying Facility Quantity:
1 first end
MRC:
The number of keying facilities provided.BSGH
Keying Facility Quantity:
1 second end
MRC:
Indicates the type of keying facility provided.BSGK
Keying Facility Type:
Keyway first end
MRC:
Indicates the type of keying facility provided.BSGK
Keying Facility Type:
Keyway second end
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Keyway and exposed coupling bolt type and mill motor
MRC:
The length of a straight line which passes through the center of the largest portion of the taper,and terminates at the circumference.CFGD
Taper Largest Diameter:
1.7490 inches second end
MRC:
The length of a straight line which passes through the center of the largest portion of the taper,and terminates at the circumference.CFGD
Taper Largest Diameter:
1.9961 inches first end and 1.9966 inches first end
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Pump, centrifugal
