TXT
묘사:
Laboratory Utility Clamp
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
0.688 inches
MRC:
The means used to attach the item.ABSX
Attachment Method:
Rod clamp
MRC:
The means by which the item is controlled.AQTG
Control Method:
Adjusting nut
MRC:
The structural characteristic of the item.ARQS
Construction:
V-shaped
MRC:
Indicates the type of jaw furnished with the item.ASYY
Jaw Type:
Single
MRC:
The means used to adjust the jaw arms.BNGF
Jaw Arms Adjustment Method:
Single nut
MRC:
The maximum length of a straight line which passes through the center of the clamping for which the item is designed,and terminates at the circumference.BNGG
Maximum Clamping Diameter:
0.500 inches
MRC:
An indication of whether or not a swivel jaw is provided.BNGH
Swivel Jaw:
Provided
MRC:
An indication of whether or not a means is provided for integral attachment.BNGJ
Integral Attachment Provision:
Provided
MRC:
Indicates the location of an item which has the attachment facility.BNGK
Err Default:
Err default
MRC:
Indicates the location of an item which has the attachment facility.BNGK
Attachment Facility Location:
End
MRC:
The maximum length of a straight line which passes through the center of the clamping for which the rod is designed,and terminates at the circumference.BNGL
Err Default:
Err default
MRC:
The maximum length of a straight line which passes through the center of the clamping for which the rod is designed,and terminates at the circumference.BNGL
Rod Maximum Clamping Diameter:
0.750 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Standard type; holds 1/4 to 1/2 in. Diameter (6 to 13mm) glass tubes and thermometers; jaws are nickel-plated phosphor-bronze; holds thermometers 3 7/8 in. (10 cm) from support rod; integral clamp holder; large thumbscrew holds clamp securely to support rod
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Aluminum alloy
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects a surface.SURF
Surface Treatment:
Nickel plated
