부품 정보
With two 1/8 in. Drill holes
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Internal flange w/external locking flange
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 0.945 inches and 1.027 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
3.999 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
3.375 inches
Left Side Flange Thickness:
Between 0.238 inches and 0.240 inches
Right Side Flange Thickness:
Between 0.238 inches and 0.240 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Used on 2 stage pump
Distance Between Flanges:
Between 0.250 inches and 0.266 inches
End To Flange Distance:
0.497 inches
Internal Flange Inside Diameter:
2.062 inches
Internal Flange Outside Diameter:
Any acceptable
Internal Flange Width:
0.312 inches
Internal Flange Lip Width:
Any acceptable
Smallest External Anchor Flange Radius:
1.938 inches
Largest External Anchor Flange Radius:
2.156 inches
Distance Below Centerline:
0.062 inches
Distance From End:
0.438 inches
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square all corners
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy 903
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-c-390 d5 federal specification single material response
