부품 정보
Nut, self retaining, u-type, single thread, panel range .187 - .207, spring steel, heat treated
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
0.031 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
Between 0.245 inches and 0.255 inches
MRC:
The length of a straight line which passes through the center of accommodation for the mating member,and terminates at the circumference.ACSZ
Mating Member Diameter Accommodated:
0.164 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.ACTA
Nut Style:
Sheet spring
MRC:
A measurement of the longest dimension of the nut,in distinction from width.ACVN
Nut Length:
Between 0.735 inches and 0.765 inches
Nut Width:
Between 0.615 inches and 0.635 inches
MRC:
An overall measurement of the smallest dimension of a panel,in distinction from length or width.ADEE
Panel Thickness:
Between 0.150 inches and 0.170 inches
MRC:
The means by which the nut is mounted.ADFP
Nut Mounting Provision:
Gripping prongs
MRC:
The number of gripping prongs included on the item.ADFS
Gripping Prong Quantity:
2
MRC:
A measurement of the longest dimension from the end of the gripping prong to the base of the nut,in distinction from width.ADFT
Gripping Prong Length:
Between 0.050 inches and 0.080 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting hole(s).ADFU
Mounting Hole Arrangement Style:
1 hole
Distance From Mounting Hole Center To Base:
Between 0.490 inches and 0.500 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
2310-01-595-3986
MRC:
The number of hole threads per linear inch measured on a line parallel to the thread axis.CQTW
Hole Thready Qty Per Inch (tpi):
18
MRC:
The nominal length of a straight line which passes through the center of the threaded hole,and terminates at the circumference.CSPF
Hole Thread Diameter:
0.164 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Fits sheet metal screw sizes 8a, 8ab, and 8b
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Zinc
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Iaw drawing 12469117, magni organic coat 565 mfr ref single treatment response
