부품 정보
Position control detent hinge
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
10.4 millimeters
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
Between 5.4 millimeters and 5.6 millimeters
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
4
MRC:
A measurement taken at right angles to the length of the body,in distinction from thickness.ADAT
Body Width:
Between 50.0 millimeters and 52.0 millimeters
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
5895-01-577-3173
MRC:
Indicates the performance capability of the item or component.AGLD
Performance Type:
Not rated
MRC:
An indication of whether or not a reversible feature is included.AJNC
Reversible Feature:
Not included
MRC:
An indication of whether or not the pin is removable.AKES
Pin Removability:
Nonremovable
MRC:
The number of cylindrical projections through which an axis or pin passes.AKEX
Knuckle Quantity:
2
Pin Center To Body Edge Distance:
28.5 millimeters
MRC:
Indicates the type of cylindrical projection through which an axis or pin passes.AKNB
Knuckle Type:
Friction
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Steel, corrosion resisting spring
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Radial load performance: max static load is 450 n (100 lbf), average ultimate load is 2600 n (575 lbf); axial load performance: max static load is 450 n (100 lbf) and average ultimate load is 1800 n (400 lbf); cycle life rating for stainless steel is up to 5000; operating temperature range is -40c (-40f) to 80c (180f); mounting holes are designed to accomodate m5 (no.10) mounting hardware with a maximum head diameter of 10.1mm (0.40") and a maximum head height of 4mm (0.16"); hinge has an 80 degree door hold position but can be adjusted to 180 degrees
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Butt
