MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Internal flange w/external locking flange
MRC:
A measurement of the longest dimension of the chamfer,in distinction from width.AAZP
Chamfer Length:
0.175 inches inside right corner
MRC:
A measurement between specified points of a groove,in distinction from height.ABGA
Groove Depth:
0.031 inches
MRC:
A measurement taken at right angles to the length of a groove,in distinction from thickness.ABGF
Groove Width:
0.125 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.196 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
6.610 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
5.966 inches
End To Flange Distance:
0.375 inches
MRC:
The distance from the center of the groove to the end of the item.ANTT
Distance From End To Groove Center:
0.628 inches
Internal Flange Inside Diameter:
4.873 inches
Internal Flange Width:
0.378 inches
Center Flange Thickness:
0.500 inches
Smallest External Anchor Flange Radius:
3.249 inches
Largest External Anchor Flange Radius:
3.444 inches
Distance Below Centerline:
0.123 inches
Anchor Groove Width:
0.750 inches
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Chamfered inside right corner
MRC:
The included angle of the chamfer(s).CSYT
Chamfer Angle:
4.0 degrees inside right corner
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy
