부품 정보
2 equal grooves; 7.969 in. Flange diameter opposite locking end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Grooved w/internal and external flange
MRC:
A measurement between specified points of a groove,in distinction from height.ABGA
Groove Depth:
0.031 inches
MRC:
A measurement taken at right angles to the length of a groove,in distinction from thickness.ABGF
Groove Width:
0.062 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.188 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
7.685 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
7.000 inches
End To Flange Distance:
0.250 inches
MRC:
The distance from the center of the groove to the end of the item.ANTT
Distance From End To Groove Center:
0.375 inches
Internal Flange Inside Diameter:
3.500 inches
Internal Flange Width:
0.250 inches
Center Flange Thickness:
0.750 inches
Smallest External Anchor Flange Radius:
3.750 inches
Largest External Anchor Flange Radius:
3.969 inches
Distance Below Centerline:
0.062 inches
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square all corners
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches inside
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy
