MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Internal flange w/external locking flange
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.000 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
Between 4.746 inches and 4.748 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
Between 4.132 inches and 4.134 inches
MRC:
A measurement of a straight line from the midpoint of a rounded corner to its periphery.ADNU
Corner Radius:
0.375 inches inside right corner
Left Side Flange Thickness:
0.188 inches
Right Side Flange Thickness:
0.188 inches
Distance Between Flanges:
0.625 inches
Internal Flange Inside Diameter:
3.250 inches
Internal Flange Outside Diameter:
Between 3.603 inches and 3.605 inches
Internal Flange Width:
Any acceptable
Internal Flange Lip Width:
Any acceptable
Smallest External Anchor Flange Radius:
2.219 inches
Largest External Anchor Flange Radius:
2.562 inches
Distance Below Centerline:
0.156 inches
Distance From End:
0.250 inches
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Round inside right corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square inside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square outside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square outside right corner
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches all surfaces
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy
