TXT
묘사:
Air Duct Hose Assembly
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Round
MRC:
A measurement of the smallest dimension of the wall,in distinction from length or width.AAGT
Wall Thickness:
0.176 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
2.625 inches first end
MRC:
The minimum inside bending radius formed without stressing or deformation of a flexible item.ACKH
Minimum Inside Bending Radius:
2.000 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
4730-01-267-8682
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.AGQM
Endlength:
3.000 inches first end
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.AGQM
Endlength:
3.000 inches second end
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Coupling both ends
MRC:
The length of a straight line which passes through the center of the end,and terminates at the inside circumference.CPYG
End Inside Diameter:
2.625 inches both ends
MRC:
An inside measurement taken at right angles to the length of the end,in distinction from thickness.CPYH
End Inside Width:
2.625 inches both ends
MRC:
A measurement of the longest inside dimension of the end,in distinction from width.CPYL
End Inside Length:
6.750 inches both ends
MRC:
The maximum pressure at which the item is rated for operation.CQGM
Maximum Operating Pressure:
3.0 pounds per square inch
MRC:
The means used and the measurement of the longest dimension of an item.CRXX
Measuring Method And Length:
120.000 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the coupling.CXMG
Coupling Style:
Connector, oxygen hose to regulator (note: applicable to hose assembly, air breathing only.) second end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the coupling.CXMG
Coupling Style:
Internal quick-disconnect first end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic fluorosilicone 1st ply
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polyester 3rd ply
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel 2nd ply
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Fully convoluted w/ wire rings between convolutions
