측정 단위:
* special requirements. EA
MRC:
The measurement of the chamfer angle,expressed in degrees.AATE
Chamfer Angle In Deg:
15.0
MRC:
A measurement of the longest dimension of the chamfer,in distinction from width.AAZP
Chamfer Length:
0.0156 inches
MRC:
A measurement taken at right angles to the length of a groove,in distinction from thickness.ABGF
Groove Width:
Between 0.190 inches and 0.200 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 8.230 inches and 8.270 inches
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
Between 0.355 inches and 0.356 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
Between 5.510 inches and 5.530 inches
MRC:
A measurement of the longest dimension of the body,in distinction from width.ADAQ
Body Length:
Between 4.015 inches and 4.035 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
Between 6.170 inches and 6.180 inches
MRC:
The length of a straight line which passes through the center of a flange,and terminates at the outside circumference.AHTC
Flange Outside Diameter:
Between 6.600 inches and 6.660 inches
MRC:
Indicates the design type of the item.APGF
Design Type:
Wet
MRC:
The angle of the bottom chamfer,expressed in degrees.AYSK
Bottom Chamfer Angle In Deg:
15.0
MRC:
A measurement of the longest dimension of the bottom chamfer,in distinction from width.AYSM
Bottom Chamfer Length:
0.0156 inches
MRC:
An indication of whether or not a valve recess(es) is included.BPPS
Valve Recess:
Not included
MRC:
An indication of whether or not a top inside chamfer is included.BPPT
Top Inside Chamfer:
Included
MRC:
An indication of whether or not a bottom inside chamfer is included.BPPW
Bottom Inside Chamfer:
Included
MRC:
An indication of whether or not a top intake port is included.BPPX
Top Intake Port:
Not included
Largest Outside Diameter Under Flange:
Between 6.5015 inches and 6.5035 inches
Largest Outside Diameter Width Under Flange:
Between 0.700 inches and 0.730 inches
Grooved Portion Outside Diameter:
Between 5.993 inches and 5.997 inches
Grooved Portion Width:
Between 1.350 inches and 1.370 inches
Groove Radius Depth:
Between 0.040 inches and 0.060 inches
MRC:
An indication of whether or not an intake hole(s) is included.BQBF
Intake Hole:
Not included
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Iron
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Iron
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Wet, relieved, three seal grooves
