부품 정보
Push built in test equipment (bite) indicator
TXT
묘사:
Fault Locating Indicator
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
0.500 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
1.832 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.500 inches
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Dc
MRC:
The value,or range of values,of direct current potential for which the item is rated.ACYR
Dc Voltage Rating:
6.0 volts
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Digital processor, f-15i
MRC:
Indicates the type of contact(s) included on the item.AKSF
Contact Type:
Solder lug
MRC:
The number of electrical connections provided.ASKX
Electrical Connection Quantity:
4
MRC:
Indicates the type and number of facilities by which the item is mounted.AXHR
Mounting Facility Type And Quantity:
1 threaded case
MRC:
The opposition that the coil offers to the flow of direct current.BDFT
Coil Dc Resistance:
Between 3.4 ohms and 1200.0 ohms
MRC:
The chemical compound or mechanical mixture properties of which the case is fabricated.CWJK
Case Material:
Aluminum
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Bhgm 57 model is manual pushbutton reset; when coil is energized, electromagnetic repulsion causes display ball to move & latch to set color which is white; with power removed set indication will be maintained; once reset button is depressed, sheild around reset magnet is separated allowing magnetic flux from reset magnet to flow into indicator circuit; since polarity of flux is opposite that of "set" condition, its display ball spins to "reset" color which is black; operates with a 50 millisec pulse length; display status is retained after pulse disappears, until reset
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Weighs 14 grams, operating temperature m 65 to p 125 degrees cel; leads shall be 30 ang polytetrafluoroethylene wire; maximum altitude 100, 000 ft
