부품 정보
Disk set abrasive dental handpiece 0.625in diameter alum oxide 400s
TXT
묘사:
Dental Handpie Abrasive Disk Set
MRC:
A measurement of the longest straight line across a circular cross-sectional plane.ADAV
Overall Diameter:
0.625 inches
MRC:
The element,compound,or mixture of which the abrasive is fabricated,excluding any backing material,binder,mix,or lubricant.AHCM
Abrasive Material:
Aluminum oxide
MRC:
The element,compound,or mixture of which the backing is fabricated,excluding any surface treatment.AHCV
Backing Material:
Plastic
MRC:
Indicates the type of abrasive coating utilized by the spacing /with or without voids/ of the mineral abrasive grains applied to the backing material.AHCY
Backing Abrasive Coating Type:
Closed
MRC:
A designation indicating the average size of the particles.AJMV
Average Particle Size Designator:
360 and 600 and 1200
MRC:
Indicates the type of abrasive provided.ANTK
Abrasive Type:
Fine and medium and coarse
MRC:
The physical configuration of the arbor hole.AQWS
Arbor Hole Shape:
Square
MRC:
An indication of whether or not a stand is included.BJWB
Stand:
Not included
MRC:
An indication of whether or not a center grommet is included.CLZP
Err Default:
Err default
MRC:
The element,compound,or mixture of which a grommet is fabricated,excluding any surface treatment.CLZQ
Err Default:
Err default
MRC:
The measured weight of the exterior container.ECWT
Exterior Container Weight:
4.00 pounds
MRC:
A measurement of volume taken by multiplying the length by the width by the height of the exterior container and rendered in cubic units.EXME
Exterior Container Cubic Measure:
0.20 cubic feet
MRC:
The number of units of issue placed inside the exterior container.EXQT
Exterior Container Quantity:
10
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Snap-on type; unmounted; safe sided; w/flex backing; u/w angle handpiece mandrel, 6520-00-971-8220 and straight handpiece mandrel, 6520-00-971-8221; for replacement disk, order 6520-01-063-3949, 6520-01-063-3950, or 6520-01-063-3951; for polishing and refinishing composite resin restoration
MRC:
A numeric value which represents a positive whole value without regard to any unit of measure.NMBR
Quantity:
400
MRC:
A measurement of volume taken by multiplying the length by the width by the height of the unit of issue and rendered in cubic units.SUCB
Unit Of Issue Cube:
0.008 cubic feet
MRC:
The measured weight of the actual container(s) or supporting device(s) which is in direct contact with the item and its contents.SUWT
Unit Of Issue Weight:
0.20 pounds
