TXT
묘사:
Compression Helical Spring
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
0.891 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ABQK
End Style:
E4 spring end, squared and ground both ends
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ABQK
End Style:
Spring end, squared and ground both ends
MRC:
The length of a straight line which passes through the center of the stock,and terminates at the circumference.ACVU
Stock Diameter:
Between 0.1155 inches and 0.1185 inches
Spring Free Length:
2.562 inches
MRC:
A numeric value that reflects the hardness of the material when used in conjunction with a hardness rating scale.ALME
Material Hardness Rating:
Between 45.0 rockwell c and 49.0 rockwell c
MRC:
The number of coils included on the item.APCN
Coil Quantity:
8
MRC:
The rated load the item is designed to accommodate.ASZD
Load Rating:
Between 160.000 pounds and 170.000 pounds
Spring Solid Length:
Between 1.437 inches and 1.531 inches
Spring Solid Outside Diameter:
Between 1.125 inches and 1.156 inches
MRC:
An indication of the coil helix direction.AXLH
Coil Helix Direction:
Right-hand or left-hand
MRC:
The weight,per specific measurement scale,required to deflect the spring.AXLP
Spring Deflection Rate:
223.000 pounds per inch
Spring Free Outside Diameter:
Between 1.125 inches and 1.156 inches
MRC:
The specific extended or compressed spring length under maximum load.CSZP
Spring Length Under Load:
1.6875 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Cylindrical
