TXT
묘사:
Pintle Hook Latch
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.375 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
4.438 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
1.375 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
2.500 inches
MRC:
Designates the thread diameter and number of threads per specific measurement scale.ABUJ
Thread Size:
5/16-24
MRC:
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.AJYP
Screw Thread Series Designator:
Unf
MRC:
The length of a straight line which passes through the center of a pivot pin hole,and terminates at the circumference.AKYJ
Pivot Pin Hole Diameter:
Between 0.880 inches and 0.883 inches
MRC:
Indicates the type of pintle for which the item was designed.BPBT
Pintle Type For Which Designed:
Manual
MRC:
An indication of whether or not a threaded pivot pin locking hole is included.BPBW
Threaded Pivot Pin Locking Hole:
Included
Width At Pivot Pin Hole:
Between 1.290 inches and 1.300 inches
Locking Pin Hole Diameter:
0.281 inches
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, a, 57-102 fs1045
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel, a, 57-102 fs1045
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
T-lock w/cotterpin hole
