부품 정보
Weapon system essential
TXT
묘사:
Solid Rubber Tire Wheel
MRC:
The design molded into the tire tread rubber to provide traction.AAGC
Tread Pattern:
Grooved tread
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
2.000 inches
MRC:
A measurement taken across the bearing surface,in distinction from thickness.ADUV
Bearing Surface Width:
0.375 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Grumman a-10 aircraft
MRC:
A designation indicating the size by which the item is commercially known and/or identified.AJXE
Size Designator:
3 by 2
MRC:
Indicates the type of tire(s) provided.ALRE
Tire Type:
Solid, flat cushion tread
MRC:
Indicates the design type of the item.APGF
Design Type:
Stamped disk
MRC:
An indication of whether or not a rim is included.ATGL
Rim:
Not included
MRC:
An indication of whether or not bearings are included.AWJQ
Bearings:
Included
MRC:
The length of a straight line which passes through the center of the wheel,and terminates at the circumference.BCDX
Wheel Diameter:
3.062 inches
MRC:
The number of bearings provided on the item.BDDY
Bearing Quantity:
2
MRC:
The length of a straight line which passes through the center of a bearing,and terminates at the inside circumference.BDFN
Bearing Inside Diameter:
0.750 inches
MRC:
Indicates the type of bearing provided.BYDT
Bearing Type:
Ball
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
No flaps
MRC:
An indication of whether or not a tire is included.CFHR
Tire:
Included
MRC:
An indication of whether or not a hub cap mounting feature is included.CFHW
Hub Cap Mounting Feature:
Not included
MRC:
The width of the wheel at the outside diameter.CFJB
Wheel Width At Outside Diameter:
1.500 inches
MRC:
An indication of the characteristic of the hub.CFJH
Hub Characteristic:
Integral
MRC:
An indication of whether or not a lubrication fitting(s) is provided.CFRY
Lubrication Fitting:
Not provided
MRC:
Indicates the type of rim for which the item is designed.CHSN
Rim Type For Which Designed:
Pressed-on
MRC:
An indication of the characteristic of the tire.CHSP
Tire Characteristic:
Integral
MRC:
The characteristic arrangement of the tire/s/.CHSQ
Tire Arrangement Characteristic:
Single
Axle Recess Diameter:
1.375 inches
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Feat
MRC:
Indicates the primary type of service for which the item is designed.CZMH
Service Type:
Aircraft ground support
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
