부품 정보
Assy incl ballnut 1.40 in. Maximum l x 0.93 in. Maximum od w/2 circuit 0.06 in. R grooves at 180 deg
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.500 inches first end
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
11.280 inches
MRC:
The number of serrations on the item.ADDW
Serration Quantity:
36 first end
MRC:
The number of serrations on the item.ADDW
Serration Quantity:
36 second end
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Convergent nozzle ball screw actuator, models av-h1, av-g1, for f100 aircraft engine
MRC:
A measurement of the longest dimension of the serrated section,in distinction from width.AJBA
Err Default:
Err default
MRC:
A measurement of the longest dimension of the serrated section,in distinction from width.AJBA
Serrated Section Length:
0.380 inches second end
MRC:
A measurement of the longest dimension of the serrated section,in distinction from width.AJBA
Serrated Section Length:
0.570 inches first end
MRC:
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.AJYP
Screw Thread Series Designator:
Unc first end
MRC:
The length of a straight line which passes through the center of the outermost surface of a serrated body,and terminates at the circumference.BDTZ
Err Default:
Err default
MRC:
The length of a straight line which passes through the center of the outermost surface of a serrated body,and terminates at the circumference.BDTZ
Serration Major Diameter:
0.3125 inches second end
MRC:
The length of a straight line which passes through the center of the outermost surface of a serrated body,and terminates at the circumference.BDTZ
Serration Major Diameter:
0.375 inches first end
MRC:
The length of a straight line which passes through the center of the innermost surface of a serrated body,and terminates at the circumference.BDYJ
Err Default:
Err default
MRC:
The length of a straight line which passes through the center of the innermost surface of a serrated body,and terminates at the circumference.BDYJ
Serration Minor Diameter:
0.290 inches second end
MRC:
The length of a straight line which passes through the center of the innermost surface of a serrated body,and terminates at the circumference.BDYJ
Serration Minor Diameter:
0.350 inches first end
MRC:
Indicates the type of bearing provided.BYDT
Bearing Type:
Ball
MRC:
The distance a worm thread advances axially in one complete turn.CFFC
Worm Thread Lead:
0.21875 inches
MRC:
The length of a straight line which passes through the center of the worm,and terminates at the outside circumference.CFFK
Worm Outside Diameter:
0.470 inches
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis of the worm.CFFN
Worm Thread Section Length:
9.615 inches
MRC:
Indicates the location of the shaft(s) on the item.CFFW
Shaft Location:
Both ends of worm
MRC:
A measurement of the longest dimension of the straight unthreaded portion of the item,in distinction from width.CFFX
Straight Unthreaded Length:
0.750 inches second end
MRC:
The length of a straight line which passes through the center of the straight unthreaded section,and terminates at the circumference.CFFY
Straight Unthreaded Section Diameter:
0.470 inches second end
MRC:
The length of a straight line which passes through the center of the threaded section pin hole,and terminates at the circumference.CFQP
Threaded Section Pin Hole Diameter:
0.164 inches first end
MRC:
The length of a straight line which passes through the center of the bearing,and terminates at the circumference.CFQS
Err Default:
Err default
MRC:
The length of a straight line which passes through the center of the bearing,and terminates at the circumference.CFQS
Bearing Diameter:
0.125 inches
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, corrosion resisting
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel
