부품 정보
Light duty; 16 gage mild steel cutting capacity; 11/64 in. Cut width; lever throttle
TXT
묘사:
Portable Pneumatic Nibbler
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
7.640 inches
MRC:
Indicates the type of handle designed to be attached to or through an item for the purpose of opening,lifting,closing,or the like.ADQF
Handle Type:
Straight
MRC:
The length of a straight line which passes through the center of the hose for which the item is designed,and terminates at the inside circumference.AJER
Hose Inside Diameter For Which Designed:
0.375 inches
MRC:
A relative measure of the mass of an item with respect to its density.AJWK
Weight:
1.9 pounds
MRC:
The nominal length of a straight line which passes through the center of the threaded air inlet, and terminates at the circumference.AKUM
Air Inlet Thread Diameter:
0.250 inches
MRC:
The required operating pressure expressed in pounds per square inch.AKVU
Operating Pressure In Psi:
90.0
MRC:
The amount of air required to operate the item.BMHT
Air Consumption:
4.0 cubic feet per minute
MRC:
The maximum thickness gage number of united states standard sheet steel that the item can cut.BSKF
Uss Gage Sheet Steel Maximum Cutting Capacity:
16
MRC:
The speed of the cutter expressed in strokes per minute.CZNB
Cutting Speed In Strokes Per Minute:
3500.0
MRC:
A recording of the physical,functional,and performance characteristics for an item of supply.TEXT
General Description:
Right angle; 16 gage mild steel cutting capacity; 3500 strokes per min.; 11/64 in. Width/depth of cut; adjustable anvil for forward, backward, left or right cutting; lever throttle; 1/4 in. Npt air inlet; 5/16 in. inside diameter hose required; 7.64 in. O/a lg; also cuts most non-ferrous metals including aluminum, brass, formica, laminates, fiberglass and masonite
