측정 단위:
* special requirements. FT
TXT
묘사:
Nonmetallic Channel
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Semi-closed channel
MRC:
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF
Nonmetallic Hardness Rating:
55.0 shore durometer a and 65.0 shore durometer a
MRC:
The maximum load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.AASH
Min. Tensile Strength (psi):
1500 pounds per square inch
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.172 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
0.875 inches
Right Side Flange Height:
0.172 inches
Left Side Flange Thickness:
0.062 inches
Right Side Flange Thickness:
0.062 inches
Left Side Top Flange Thickness:
0.062 inches
Right Side Top Flange Thickness:
0.062 inches
Left Side Top Flange Width:
0.187 inches
Right Side Top Flange Width:
0.187 inches
Outer Radius Where Left Flange Joins Top Flange:
0.031 inches
Fillet Radius Where Left Flange Joins Top Flange:
0.031 inches
Outer Radius Where Right Flange Joins Top Flange:
0.031 inches
Fillet Radius Where Right Flange Joins Top Flange:
0.031 inches
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Oil resistant and ozone resistant and weather resistant
Fillet Radius Where Left Flange Joins Base Flange:
0.031 inches
Outer Radius Where Left Flange Joins Base Flange:
0.031 inches
Left Side Flange Top Radius:
0.031 inches
Base Flange Thickness:
0.062 inches
Outer Radius Where Right Flange Joins Base Flange:
0.031 inches
Fillet Radius Where Right Flange Joins Base Flange:
0.031 inches
Right Side Flange Top Radius:
0.031 inches
MRC:
The style designation corresponding to the shape of the left-side flange tip.BHQU
Left-side Flange Tip Style:
Left full radius
MRC:
The style designation corresponding to the shape of the right-side flange tip.CZLZ
Right-side Flange Tip Style:
Right full radius
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber synthetic
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-r-6855, class 2, type a, grade 60 military specification single material response
