부품 정보
For loads below 30 lbs.
TXT
묘사:
Extension Helical Spring
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
0.250 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ABQK
End Style:
Short twisted hook both ends
MRC:
A measurement of the smallest dimension of the stock,in distinction from length or width.ACVW
Stock Thickness:
0.055 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Tristar a/c
Spring Free Length:
2.750 inches
MRC:
The number of coils included on the item.APCN
Coil Quantity:
40
MRC:
Indicates the design type of the item.APGF
Design Type:
Closed
MRC:
The rated load the item is designed to accommodate.ASZD
Load Rating:
14.66 pounds
MRC:
An indication of the coil helix direction.AXLH
Coil Helix Direction:
Right-hand
MRC:
The weight,per specific measurement scale,required to deflect the spring.AXLP
Spring Deflection Rate:
Between 10.872 pounds per inch and 13.288 pounds per inch
Spring Free Outside Diameter:
Between 0.352 inches and 0.368 inches
Hook Radius:
0.180 inches both ends
MRC:
An indication of the angular relationship of the ends of the item.AXMH
End Angular Relationship:
Ends parallel one to other
MRC:
The specific extended or compressed spring length under maximum load.CSZP
Spring Length Under Load:
Between 1.188 inches and 1.452 inches
Coil To Hook Inside Length:
0.275 inches both ends
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 302 or steel comp 304
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qqw-423 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-35 federal specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Cylindrical
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
81343-as24586c149 professional/industrial association standard
