MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Table
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
21.000 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
17.125 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
17.625 inches
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
The number of complete cyclic changes,per unit of time,for which an item is rated.ACZB
Frequency Rating:
Between 50.0 hertz and 100.0 hertz
MRC:
The element,compound,or mixture of which the case is fabricated,excluding any surface treatment.ADTV
Case Material:
Aluminum
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off. plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects the surface of the case.ADTY
Case Surface Treatment:
Enameled
MRC:
The range of complete cyclic changes,per unit of time,for which an item is rated.AFGQ
Frequency Range Rating:
+1.800/+4.000 gigahertz
MRC:
The number of parts supplied with the item which may be required for application.AFHS
Accessory Component Quantity:
1 and 1 and 1 and 2 and 1 and 3
MRC:
The name of the government agency or commercial organization that controls the manufacture of the accessory item.AKVY
Accessory Controlling Agency:
Jcens; jcens; jcens; jcens; jcens; jcens
MRC:
The specific number used to identify the accessory.AKVZ
Accessory Identifying Number:
Ts-403b/u type no. And cy-669a/u type no. And cx-3277/u/6ft0in type no. And cg-409a/u/8ft2in type no. And cg-92b/u/6ft0in type no. And ug-273/u type no.
MRC:
An indication of whether or not a facility/ies/ to accommodate a battery/ies/ is included.ALSF
Internal Battery Accommodation:
Not included
MRC:
The total opposition (resistive and reactive) presented by the item to an alternating current load.AMNE
Output Impedance Rating:
50.0 ohms
MRC:
The value(s) of potential for which the item is rated.AMSE
Voltage Rating:
Between 103.5 volts and 126.5 volts
MRC:
The number of specified ranges of frequencies or wavelengths operating between two stated limits.ANLC
Frequency Band Quantity:
1
MRC:
Indicates the type of modulation provided.AYYE
Modulation Type:
Fm and pulse
MRC:
The name of the accessory component assigned by the controlling agency.AZCG
Accessory Component Name:
Generator, signal; case; cable assembly, power, electrical; cable assembly, radio frequency; cable assembly, radio frequency; connector, adapter
MRC:
The degree of conformity of a measurement to a standard or true value for which the calibration is rated.BDHW
Calibration Accuracy Rating:
Porm 1.000 percent
MRC:
An indication of whether or not a crystal controlled feature is provided.BHFY
Crystal Controlled Feature:
Not provided
MRC:
An indication of the calibrated signal range that is output by the item.BHFZ
Calibrated Signal Output Range:
0.1 uv to 224 mv
MRC:
An indication of the signal output constancy.BHGC
Signal Output Constancy:
Porm 2 db maximum variation throughout frequency range
MRC:
Indicates the location of the modulator on the item.BHGD
Modulator Location:
Internal
MRC:
The number of complete cyclic changes,per unit of time,for which the modulation is rated.BHQD
Modulated Frequency Rating:
Between 0.050 hertz and 100.0 hertz
MRC:
The number of complete cyclic changes,per unit of time,for which the pulse repetition is rated.BHQF
Pulse Repetition Frequency Rating:
Between 40.0 hertz and 400.0 hertz
MRC:
An indication of the degree of modulation provided.BHQG
Modulation Degree:
Between 50.0 usec pulse and 125.0 usec pulse
MRC:
The number of alternating current phases.FAAZ
Phase:
Single