부품 정보
Manufacturers nomenclature is clamp, loop; finish shall be heat treated per mil-h-6088 to t42 conditions
MRC:
Indicates the type of hole/s/ in the tongue.AAAL
Tongue Hole Type:
Round, unthreaded
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 0.365 inches and 0.385 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.199 inches and 0.209 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
C17a aircraft
MRC:
The length of a straight line which passes through the center of the material,and terminates at the circumference.AJRB
Material Diameter:
Between 0.026 inches and 0.036 inches
Center To Center Distance Between Loop And Mounting Hole:
Between 0.579 inches and 0.609 inches
MRC:
The length of a straight line which passes through the center of the loop,and terminates at the inside circumference.BZTN
Loop Inside Diameter:
Between 0.620 inches and 0.630 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/5 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Chromate
