MRC:
The number of teeth included on the item.AJLA
Teeth Quantity:
32
MRC:
A nominal measurement of the smallest dimension of an item,in distinction from length or width.CWCK
Thickness:
0.480 inches
MRC:
The nominal dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.CWFR
Nominallength:
10.900 inches
MRC:
Indicates the type of teeth included on the item.CWMW
Teeth Type:
Spur
Pitch Height:
0.4482 inches
MRC:
An indication as to whether the teeth are a standard depth or modified to a shorter depth.CWNH
Tooth Form:
Standard
MRC:
The measurement of the pressure angle on the item.CWPP
Pressure Angle:
20.0000 degrees
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.CWRM
Face Width:
0.230 inches
MRC:
The nominal distance from the end of the item to the center of the first mounting hole.CWZS
Distance From End To First Mounting Hole Center:
1.4500 inches transversely through side
MRC:
The nominal distance from the end of the item to the center of the first mounting hole.CWZS
Distance From End To First Mounting Hole Center:
0.9500 inches transversely through bottom
MRC:
The nominal distance between the center of a mounting hole and the center of an adjacent mounting hole.CWZZ
Center To Center Distance Between Mounting Holes:
0.500 inches transversely through side
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 302 or steel comp 303
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-7720 military specification all material responses
