부품 번호 AEM02012

Nonmetallic Tubing

가격 및 가용성

이 NSN의 현재 가격 및 가용성에 대해 이 양식을 제출하십시오.
부품 번호:
양:
이메일 주소:
전화:
참조:
회사:
이름:

우리는 귀하의 정보를 누구에게도 공유하거나 판매하지 않습니다.
사생활 | 용어

All major credit cards accepted as well as gov. p-cards

이 제품의 과거 가격은 1.88 and 2.538 USD. 수량, 가용성, 상태, 리드 타임 및 품목 중단 가능성에 따라 최신 견적을 제공할 때까지 가격을 보장할 수 없습니다.

부품 번호
비무장화
수명
UOM
NIIN
부품 번호:
aem02012
비무장화:
No
수명:
N/A
측정 단위:
# blk FT
NIIN:
014640411

부품 정보
working pressure, re mrc cqgm 56.0 and burst pressure, re mrc cqbd psi at 73 degrees fahrenheit, min bend radius 0.625, inside diameter.188 inches, outside diameter 0.312 inches, wall thickness 0.062 inches, ultimate elongation pct 500, tensile stress at 300 pct elonation psi 1550, brittle point degrees f. Negative 100, tear resistance, lbf in 475, high temperature limit degrees f. Intermittent 200.0, ection pct 68, tensile set at 75 pct elongation pct 98, abrasionresistance, mg lost 1, 000 cycles equals

NSN
국가 주식 번호:
4720-01-464-0411 4720014640411
TXT
묘사:
Nonmetallic Tubing
INC
INC
아이템 이름 코드:
31934
MRC:
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF
Nonmetallic Hardness Rating:
82.0 shore durometer a
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-100.0 degrees fahrenheit single response and 200.0 degrees fahrenheit single response
MRC:
The hue or tint of the exterior of the item.ADJS
Exterior Color:
Clear
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
6115-01-435-1565; generator set, diesel engine; p/n 95-531
MRC:
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC
Min. Tensile Strength (psi):
6050 pounds per square inch
MRC:
The minimum internal pressure rating,determined by destruction tests,at which the item can be expected to rupture.CQBD
Burst Test Pressure:
280.0 pounds per square inch single response
MRC:
The maximum pressure at which the item is rated for operation.CQGM
Maximum Operating Pressure:
56.0 pounds per square inch single response
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polyurethane tube

{lang[cimilar]} Nonmetallic Tubings

« Hose and Flexible Tubing {lang[catalog]}
지금 비교»
맑다 | 숨기다