부품 정보
Water absorbing monitor cartridge
TXT
묘사:
Fluid Filter Element
MRC:
The length of a straight line which passes through the center of the body,and terminates at the circumference.ABPM
Body Diameter:
6.000 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
3.500 inches
MRC:
The size of the smallest particle which the element is capable of removing from the fluid which passes through the filtering material.ADNH
Filtration Rating In Microns:
0.5
MRC:
The direction in which the fluid is passed through the item.ADNK
Flow Direction:
Inside out
MRC:
The amount of surface area of the filtering material through which the fluid flows.ADNL
Filtering Surface Area:
13.860 square feet
MRC:
The amount of pressure loss in the system,due to the resistance of flow through the item.ADNP
Drop Pressure:
5.0 pounds per square inch
MRC:
The difference in opposing pressure which an item is capable of withstanding without evidence of deformation or other damage.ADNQ
Differential Pressure:
75.0 pounds per square inch
MRC:
Indicates the design type of the item.APGF
Design Type:
Nonreusable
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.AZKQ
Tempurature Rating:
225.0 degrees fahrenheit
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the body.AZTL
Bodylength:
33.000 inches
MRC:
An indication of the structure or characteristic of the filtering media.CRXW
Filtering Media Design:
Pleated single filtering media response
MRC:
The filtering system for which the item is designed to be used.CXZX
Filtering System For Which Designed:
Full flow
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Water absorbing element; mounting end has threaded base which screws on velcon 600t mounting adapter; top end is a blind end cap with a 1" long bolt for mounting to spider; rated at 120gpm
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Glass fiber filtering medium
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber buna n seal
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Fuel/oil, hydrocarbon
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Cylindrical w/ container (non-rigid)
