부품 정보
Includes guard, headlight and taillight
MRC:
The specific commercial rating which classes the item as to what degree the item will withstand environmental elements and/or hazardous locations.ABFE
Hazardous Locations/environmental Protection:
U.L. Type g
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
38.000 inches
MRC:
A measurement of the longest dimension of a fork,in distinction from width.AGBS
Fork Length:
40.000 inches
MRC:
A measurement taken at right angles to the length of a fork,in distinction from thickness.AGBT
Fork Width:
4.000 inches
Overall Height With Forks In Lowest Position:
83.000 inches
Overall Height With Forks In Highest Position:
181.750 inches
Overall Length Without Forks:
81.870 inches
MRC:
The radius of a circle formed by the outermost part of a vehicle while executing the shortest possible turn.AGCQ
Vehicular Turn Radius:
74.000 inches
MRC:
The minimum distance required between pallets,platforms,and the like /storage aisle width/,to perform right angle stacking and/or tiering functions.AGCR
Storage Aisle Minimum Width:
44.000 inches
MRC:
A measurement of the distance from the front face of the forks to a specified point at which the rated load capacity is determined.AGCT
Fork Load Center Distance:
24.000 inches
MRC:
The maximum vertical height or distance the carrying surface of the forks,platform,and the like,can be raised from ground level without extending the uprights beyond the specified collapse mast height.AGDB
Fork/platform Maximum Free Lift Height:
57.000 inches
MRC:
Indicates the type of lift mechanism included on the item.AGDC
Lift Mechanism Type:
Hydraulic
MRC:
The means by which the lift is actuated.AGDD
Lift Actuation Method:
Manual
MRC:
The distance measured from the ground/floor surface to the load carrying surface in the lowest position.AGDE
Minimum Load Carrying Surface Height:
1.750 inches
MRC:
Indicates the type of steering mechanism provided on the item.AGDS
Steering Type:
Crabbing
MRC:
Indicates the type of prime mover included with the unit.AKDJ
Prime Mover Type:
Gasoline engine
MRC:
Indicates the type of transmission used to transfer developed mechanical energy to the drive unit.AXJD
Transmission Type:
Automatic
MRC:
The maximum rated load the item is designed to accommodate.AYXK
Maximum Load Rating:
4000.000 pounds
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Telescopic mast
MRC:
Indicates the type and number of wheels included on the item.CRRF
Wheel Type And Quantity:
2 dual solid steerable wheel
MRC:
Indicates the type and number of wheels included on the item.CRRF
Wheel Type And Quantity:
2 dual solid drive wheel
Lift Height Of Forks:
180.000 inches
Boom Forward Tilt Angle:
3.0 degrees
MRC:
The commercial and government entity (cage) code of the manufacturer of the prime mover furnished with the item and the model number.CSQX
Prime Mover Manufacturer Code And Model Number:
02978-f13508019
Boom Backward Tilt Angle:
6.0 degrees
MRC:
The outside to outside distance between forks.CWAH
Fork Spread Distance:
Between 8.000 inches and 38.000 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Conventional
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
81349-mil-t-21870/2a specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
