MRC:
The ability of an item to withstand a specified torque load without fracture.AAPL
Torque Load Rating:
7.00 inch-ounces
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
2.531 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
1.609 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.500 inches
MRC:
The pattern or arrangement that describes the mounting configuration of the item.ALGC
Mounting Configuration:
Three 5/32 in. Diameter holes located on corners of isosceles triangle base 1.125 in. Height 2.156
MRC:
The basic structure of the item.ALXF
Structural Design:
Sectional
MRC:
The value/s/ of direct current potential which must be applied to the item for operation,expressed in volts.APBR
Dc Operating Voltage Rating In Volts:
28.0
MRC:
The specific number of contact terminals included.APNG
Contact Terminal Quantity:
3
MRC:
The specific number of coil terminals included.APNH
Coil Terminal Quantity:
3
MRC:
An indication of whether or not the reset facilities are provided.APNR
Reset Facility Feature:
Provided
MRC:
The direction of rotation for which the item is designed.AYSY
Rotation Direction For Which Designed:
Clockwise
MRC:
The number of sections included.BWGP
Section Quantity:
1
MRC:
The number of coil winding(s) provided.CPWL
Coil Winding Quantity:
2
MRC:
An indication of the characteristic(s) of a winding.CPWM
Winding Characteristic:
Single wound untapped
MRC:
The amount of direct current resistance required to activate the coil pull-in.CPWP
Coil Pull-in Dc Resistance Rating:
Between 7.0 ohms and 8.0 ohms
MRC:
The amount of direct current resistance required to maintain operation of the coil hold-in.CPWQ
Coil Hold-in Dc Resistance Rating:
Between 260.0 ohms and 275.0 ohms
MRC:
The measurement of the shaft rotation,expressed in degrees.CPWT
Shaft Rotation In Deg:
30.0
