부품 정보
Shape leaf to a 21.000 in. Min, 25.000 in. Max, radius
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
3.900 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
Between 0.044 inches and 0.056 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
Between 0.097 inches and 0.102 inches
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
4
MRC:
A measurement of the center to center distance between the mounting holes along the length.ADFY
Center To Center Distance Between Mounting Holes Along Length:
0.900 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
W/s: aircraft, tomcat f-14
MRC:
Indicates the performance capability of the item or component.AGLD
Performance Type:
Not rated
MRC:
An indication of whether or not a reversible feature is included.AJNC
Reversible Feature:
Not included
MRC:
An indication of whether or not a hinge pin is included.AKEW
Hinge Pin:
Not included
MRC:
The number of cylindrical projections through which an axis or pin passes.AKEX
Knuckle Quantity:
3
Knuckle Length:
Between 0.491 inches and 0.495 inches
End Knuckle Length:
0.200 inches
Pin Center To Body Edge Distance:
0.750 inches
Knuckle Inside Diameter:
Between 0.093 inches and 0.098 inches
MRC:
Indicates the type of cylindrical projection through which an axis or pin passes.AKNB
Knuckle Type:
Friction
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Aluminum alloy, qq-a-200/3
MRC:
The plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects the surface of the item and its location.ANNR
Surface Treatment And Location:
Anodized, mil-a-8625, type 2, class 1
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Butt parallel holes
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
81349-mil-i-6866 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
