TXT
묘사:
Fluid Filter Head
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.500 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
6.000 inches
MRC:
The length of a straight line which passes through the center of a bolt circle,and terminates at the circumference.ABKG
Bolt Circle Diameter:
6.094 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
2.500 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
6.000 inches
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.ACRW
Inlet Thread Class:
2b
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.ACRX
Inlet Thread Direction:
Right-hand
MRC:
A designation indicating the diameter-pitch and the number of threads per specific measurement scale applied to a series of specific diameters of an inlet.ARNX
Inlet Thread Series Designator:
Uns
MRC:
A designation indicating the diameter-pitch and the number of threads per measurement scale applied to a series of diameters of an outlet.ARTX
Outlet Thread Series Designator:
Uns
MRC:
The direction of the outlet thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.ARTY
Outlet Thread Direction:
Right-hand
MRC:
A measurement of the number of threads on the outlet per linear inch,including incomplete threads,on a line parallel to the thread axis.BZSW
Outlet Thready Qty Per Inch (tpi):
14
MRC:
Indicates the type of inlet port provided.CDXM
Inlet Port Type:
Threaded female, gasket seal
MRC:
Indicates the type of outlet port provided.CDXQ
Outlet Port Type:
Threaded male, regular flare
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.CDXR
Outlet Thread Class:
2a
MRC:
The angle of the outlet end surface upon which the mated surface seats,expressed in degrees.CDXT
Err Default:
Err default
MRC:
An indication of whether or not a valve is included.CDXY
Valve:
Not included
MRC:
An indication of whether or not a mounting bolt hole(s) is provided.CDYC
Mounting Bolt Hole:
Provided
MRC:
An indication of whether or not a filter element is included.CDYD
Filter Element:
Not included
MRC:
Designates the nominal thread diameter and number of threads per measurement scale of an inlet threaded hole.CRHS
Inlet Thread Size:
1.000 inches
MRC:
The number of screw threads on the inlet per linear inch,including incomplete threads on a line parallel to the thread axis.CRJG
Inlet Thready Qty Per Inch (tpi):
14
MRC:
A designation that is used for the purpose of general identification of the outlet thread.CSJD
Outlet Thread Size:
1.000 inches
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
A numeric value which represents a positive whole value without regard to any unit of measure.NMBR
Quantity:
4
