부품 번호 A42437

Safety Relief Valve

가격 및 가용성

이 NSN의 현재 가격 및 가용성에 대해 이 양식을 제출하십시오.

이 제품의 과거 가격은 5657.6 and 7398.4 USD. 수량, 가용성, 상태, 리드 타임 및 품목 중단 가능성에 따라 최신 견적을 제공할 때까지 가격을 보장할 수 없습니다.

부품 번호

비무장화

수명

UOM

NIIN

부품 번호:

a42437

비무장화:

수명:

N/A

측정 단위:

No qup EA

NIIN:

001635161

부품 정보
Items are being coded as critical to insure source inspection will be performed at the point of manufacture, prior to material receipt by the us navy or other dod components. These items are piece parts or end items in support of vital military hardware necessary to sustain the successful mission of the ships, submarines, and shore stations of the us navy. Critical features including, but not limited to, dimensions, tolerances/clearances, electronic characteristics, and metallurgical properties will bespecified for government q ar (quality assurance representatives) to insure the highest possible degree of quality and reliability of these parts being delivered under navicp contracts

NSN

국가 주식 번호:

4820-00-163-5161 4820001635161

TXT

묘사:

Safety Relief Valve

INC

아이템 이름 코드:

05488

MRC:

The part that controls the flow through the item.ADQU

Flow Control Device:

Disk

MRC:

Indicates the type of housing on the item that accommodates the stem packing or spring.ADSR

Bonnet Type:

Exposed spring

MRC:

The means by which the bonnet is attached to the item.ADST

Bonnet Attachment Method:

Bolted

MRC:

The means of closing the item when inlet pressure decreases.ADSU

Disk Loading Method:

Spring

MRC:

The rated valve discharge capacity per unit of time.ADSY

Valve Discharge Flow Rate:

43200.0 pounds per hour

MRC:

Indicates the type of renewable seating ring in the item.ADZH

Renewable Seat Ring Type:

Threaded

MRC:

The number of bolt holes provided on the item.AECS

Bolt Hole Quantity:

8 1st end

MRC:

The number of bolt holes provided on the item.AECS

Bolt Hole Quantity:

8 2nd end

MRC:

The means used to control the operation of the valve.AQLR

Valve Operation Method:

Automatic or manual

MRC:

The physical configuration of the flange.ARKN

Flange Shape:

Round with holes 1st end

MRC:

The physical configuration of the flange.ARKN

Flange Shape:

Round with holes 2nd end

MRC:

Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL

Features Provided:

Pressure tight outlet side

MRC:

Designates the size of the valve.CCFG

Valve Size:

2.500 inches

MRC:

The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL

Criticality Code Justification:

Feat

MRC:

The predetermined pressure at which the item is calibrated to open.CSDC

Opening Pressure Setting:

710.0 pounds per square inch

MRC:

The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.CWCD

Outside Diameter:

7.500 inches 1st end

MRC:

The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.CWCD

Outside Diameter:

9.000 inches 2nd end

MRC:

A nominal measurement of the smallest dimension of an item,in distinction from length or width.CWCK

Thickness:

1.188 inches 2nd end

MRC:

A nominal measurement of the smallest dimension of an item,in distinction from length or width.CWCK

Thickness:

1.250 inches 1st end

MRC:

The nominal length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.CWCQ

Bolt Hole Diameter:

0.875 inches 1st end

MRC:

The nominal length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.CWCQ

Bolt Hole Diameter:

0.875 inches 2nd end

MRC:

The nominal length of a straight line which passes through the center of the bolt circle,and terminates at the circumference.CWCT

Bolt Circle Diameter:

5.875 inches 1st end

MRC:

The nominal length of a straight line which passes through the center of the bolt circle,and terminates at the circumference.CWCT

Bolt Circle Diameter:

7.250 inches 2nd end

MRC:

The design of the flange face.CWDF

Flange Face Design:

Raised straight 2nd end

MRC:

The design of the flange face.CWDF

Flange Face Design:

Recessed straight 1st end

MRC:

A nominal measurement from the bottom to the top surface of a raised face,in distinction from depth.CWDH

Raised Face Height:

0.062 inches 2nd end

MRC:

The nominal length of a straight line which passes through the center of a raised face,and terminates at the circumference.CWDL

Raised Face Diameter:

5.500 inches 2nd end

MRC:

The nominal length of a straight line which passes through the center of the recess,and terminates at the circumference.CWDP

Recess Diameter:

6.875 inches 1st end

MRC:

A nominal measurement between specified points on the recess,in distinction from height.CWDS

Recess Depth:

0.062 inches 1st end

MRC:

The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL

Style Designator:

Err-090

MRC:

The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL

Style Designator:

Angle flanged ends

MRC:

A feature of the item of supply which must be specifically recorded when the reference number covers a range of items.ZZZY

Reference Number Differentiating Characteristics:

As differentiated by the valve discharge flow rate requirement

코드	정의
FN	공장 신규. 당시 OEM에서 제조한 부품이며 제조업체 인증이 포함되어 있습니다.
NE	새로운. OEM에서 제조한 부품. 제조업체 인증 또는 회사 인증이 포함될 수 있습니다.
NS	새로운 잉여. 초과 재고에서 구매한 새 재료 항목입니다.
OH	철저. 제품은 수리점(MRO)에서 제조업체의 사양에 따라 재건 및 테스트되었습니다.
SV	서비스 가능한 제품
AR	제거된 대로. 부품의 기능에 대한 보증 없이 항공기 또는 플랫폼에서 제거된 제품.
RP	수선할 수 있는. 제품은 MRO로 수리할 수 있으며 FAA 8130 또는 EASA Form 1 인증을 받을 수 있습니다.

부품 번호 A42437

가격 및 가용성

{lang[cimilar]} Safety Relief Valves

지금 비교»