부품 정보
Cable assembly tlc 50 ohm
TXT
묘사:
Electrical Ribbon Cable Assembly
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Wsd 39a
MRC:
The center to center distance between the terminal holes.AGTK
Center To Center Distance Between Terminal Holes:
0.100 inches
MRC:
Indicates the type of facility provided on the device for attaching to another item.AKRZ
Termination Type:
Connector receptacle both ends all conductors
MRC:
The number of electrical conductors included on the item.AMQN
Conductor Quantity:
25
MRC:
The fabricated form of the conductor.CXCW
Conductor Form:
Solid all conductors
MRC:
The designation used to describe the round stranded or round solid conductor size.CXDC
Round Conductor Size:
30 awg all conductors
MRC:
The arrangement and number of arrangements of the conductors.CXDQ
Conductor Arrangement And Quantity:
25 molded
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Housing contains standard pressure copper alloy receptacle contacts plated with .000030 min inch thick gold over .000050 min inch thick nickel in mating area; p2 connector must mate and latch to amp part no 1-102158-0; p1 and p2 housing shall be thermoplastic; the housing is a 50 position header; pull tabs shall be provided; the cable shall be 50 ohm transmission line cable; 25 signal conductors; 50 grnd conductors 32 awg silver plated copper; 50 +-5 ohm impedance; 28 pico-farads per foot capacitance; 14 nanoseconds per foot propagation delay; pin 1 shall be clearly identified on p1 and p2; resistance of cable assembly shall be less than .21ohms for signal conductors and less than .18 ohms for grnd conductors; cable assemblies shall b able to withstand 300 vdc between any adjacent signal and/or grnd paths; impedance of assembly shall be 50 +-5 ohms
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper core conductor all conductors
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Silver alloy core coating all conductors
MRC:
An indication of the precious material and its location in the item.PMLC
Precious Material And Location:
All connector ends plated with 0.000050 inches thick gold and all conductors silver plated silver
MRC:
Identification of the precious material contained in the item.PRMT
Precious Material:
Gold and silver
