부품 정보
One external radial oil groove 0.5000 in. W 0.1250 in. Deep with center line 1.5000 in. From left end, two internal radial oil grooves 0.0938 in. Radius 0.0938 in. Deep one at each end with center line 0.3750 in. From ends, one internal radial oil groove 0.0938 in. Radius 0.0938 in. Deep with centerline 1.5000 in. From left end, four internal oil grooves 0.0938 in. Radius 0.0938 in. Deep equally spaced at 45 degrees helix angel to lg, four 0.2500 in. Holes equally spaced in external radial oil groove
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.2500 inches first
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
5.0000 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
Between 4.9400 inches and 4.9410 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
Between 3.3900 inches and 3.3950 inches
MRC:
The element,compound,or mixture with which the item is lubricated.ADZG
Lubrication Material:
Grease
MRC:
The length of a straight line which passes through the center of the flange,and terminates at the outside circumference.AEPR
Flange Outside Diameter:
Between 5.4688 inches and 5.5312 inches
MRC:
A measurement taken at right angles to the length of a flange,in distinction from thickness.AGFF
Flange Width:
Between 0.4688 inches and 0.5312 inches
MRC:
Indicates the type and number of features used for the introduction of a lubricant or an antirotational device.CTJM
Antirotation/lubrication Type And Quantity:
4 hole
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
22c solid, external flange one end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Solid, external flange one end
