TXT
묘사:
Ignition System Distributor
MRC:
The basic material of which the body is fabricated.AAFZ
Body Material:
Any acceptable
MRC:
A measurement of the longest dimension of the shaft,in distinction from width.ABXF
Shaft Length:
6.264 inches
MRC:
Indicates the type of drive shaft by the physical configuration,condition,and the like of the shaft end.AJAB
Drive Shaft Type:
Tongue
MRC:
The direction of rotation of a rotating shaft as viewed from the drive end.AKCT
Shaft Rotation Direction:
Counterclockwise
MRC:
An indication of whether or not a distributor cap is included.ARFE
Distributor Cap:
Included
MRC:
The means of attaching the item.AXGY
Mounting Method:
Clamp
MRC:
The number of impulses produced by one complete revolution.AXRT
Impulse Quantity Per Revolution:
4
MRC:
Indicates the type of ignition for which the item is designed.AXRW
Ignition Type For Which Designed:
Single
MRC:
Indicates the type of terminals included in the distributor cap to accommodate the spark plug wires.AYEN
Secondary Terminal Type:
Push-in
MRC:
Indicates the type of terminals included in the distributor cap to accommodate the coil wire.AYER
Coil Terminal Type:
Push-in
MRC:
Indicates the type of primary terminal accommodation/s/ on the item.AYEY
Primary Terminal Accommodation Type:
Screw
MRC:
The means by which the spark advance is controlled.AYKD
Spark Advance Control Method:
Vacuum
MRC:
The maximum number of degrees the item is advanced.AYKF
Maximum Advance Deg:
22.0
MRC:
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters of a primary terminal accommodation.BYPP
Primary Terminal Accommodation Thread Series:
Unf
MRC:
The means by which the spark is transferred from the rotor to the spark plug terminals.CPWB
Spark Distribution Method:
Contact
MRC:
A measurement of the length of a straight line which passes through the center of a coaxial cylinder in plan view which would bound the crest of an external thread or the root of an internal thread.CPWH
Primary Terminal Accommodation Thread Diameter:
0.190 inches
MRC:
The number of screw threads on the primary terminal accommodation per linear inch,including incomplete threads,on a line parallel to the thread axis.CPWJ
Primary Terminal Accommodation Thready Qty Per Inch (tpi):
32
