MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
3.18 millimeters all holes
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
34.10 millimeters
MRC:
The length of a straight line which passes through the center of a bolt circle,and terminates at the circumference.ABKG
Bolt Circle Diameter:
3.28 millimeters
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
34.10 millimeters
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
34.10 millimeters
MRC:
A measurement of a straight line extending from the center of a circle to the end.ABPZ
End Radius:
17.06 millimeters
MRC:
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.ABVL
Aperture Diameter:
30.20 millimeters
MRC:
A measurement of the center to center distance between the bolt holes along the width.ADUY
Center To Center Distance Between Bolt Holes Along Width:
26.97 millimeters all holes
MRC:
A measurement of the center to center distance between the bolt holes along the length.ADUZ
Center To Center Distance Between Bolt Holes Along Length:
26.97 millimeters all holes
Outside Edge To Bolt Hole Center Distance Along Width:
3.57 millimeters
Outside Edge To Bolt Hole Center Distance Along Length:
3.57 millimeters
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
0.813 millimeters
MRC:
The length of a straight line which passes through the center of the center hole,and terminates at the circumference.ADYT
Center Hole Diameter:
30.20 millimeters
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
4
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
6115-01-561-7788
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Material is nickel coated graphite silicone; dwg 04-20451, cage 30554; gasket is 30.2 millimeters diameter; shape is square 34.1 millimeters with rouinded edges and there are four holes one on each curved corner; it is 0.813mm
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Silicone
