TXT
묘사:
Permanent Magnet Loudspeaker
MRC:
The number of terminals for providing electrical connection to the item.AARA
Terminal Quantity:
2
MRC:
Indicates the type of terminals for providing electrical connection to the item.AARB
Terminal Type:
Tab, solder lug
MRC:
An overall measurement between specified points of an item,in distinction from height.ABFY
Overall Depth:
2.250 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.164 inches
MRC:
A measurement of the amount of turning necessary to bring one half into coincidence with another,expressed in degrees.ABVJ
Angle Between Centerlines Of Mounting Holes In Deg:
90.0
MRC:
A measurement of the longest straight line across a circular cross-sectional plane.ADAV
Overall Diameter:
6.000 inches
MRC:
The additional parts supplied with the item which may be required for application.AFHR
Accessory Components:
Channel selector switch and volume control switch
MRC:
The minimum and maximum frequencies to which the item will respond,expressed in hertz.AFYW
Frequency Response Range In Hertz:
+120.0/+7000.0
MRC:
The amount of electrical energy that can be dissipated.AJDB
Power Rating:
5.00 watts normal
MRC:
The length of a straight line which passes through the center of a circular transducer,and terminates at the circumference.AKNQ
Transducer Diameter:
8.0 inches
MRC:
The total opposition /resistive and reactive/ which the transformer primary winding offers to the flow of alternating current,expressed in ohms.AKPD
Transformer Primary Impedance Rating In Ohms:
30000.0
MRC:
The number of mounting facilities provided.AKPV
Mounting Facility Quantity:
4
MRC:
Indicates the type of device that converts energy from one form to another.AKVS
Transducer Type:
Cone
MRC:
The radius of the circle in which the mounting facilities of an item are located.ALAQ
Mounting Facility Circle Radius:
2.750 inches
MRC:
Designates the thread diameter,series/type,and number of threads per measurement scale of the mounting facility.ALBL
Mounting Facility Thread Size And Series/type Designator:
8-32 unc
MRC:
Indicates the designed use of the item.ALBY
Usage Design:
Outdoor
MRC:
The installation for which the item is designed.AMQY
Installation Design:
Nonportable
MRC:
The total opposition /resistive and reactive/ which the item offers to the flow of alternating current,expressed in ohms.AWZH
Impedance Rating In Ohms:
8.0 voice coil
MRC:
The means of attaching the item.AXGY
Mounting Method:
Threaded hole
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Round
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
81349-mil-l-17080 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
