부품 정보
Closed air cells between plastic walls- 0.188 in. Nom o/a thk
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
10.000 inches
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Waterproof and grease and abrasion resistant
MRC:
The means by which the body parts are designed to be fastened together.AFPN
Assembly Method:
Heat seal
MRC:
Indicates the type of device(s) used to secure the closure of the item.AFPQ
Closure Fastening Type:
Heat seal
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Plastic, polyethylene first wall and plastic, polyethylene second wall and paper, kraft third wall
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.AQPL
Face Width:
5.000 inches
MRC:
The location of the opening on the item.ARQT
Opening Location:
One end
MRC:
The paper weight based on a given quantity of sheets of a specified size or based on a specified square area and its location.ARRD
Basis Weight And Location:
70.0 pounds per 500 sheets 24 x 36 third wall
MRC:
The nominal measurement between two plane surfaces of the material as distinguished from length or width,and its location.ARRF
Material Thickness And Location:
0.0040 inches first wall and 0.0040 inches second wall
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
Buff
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Flat
