부품 정보
Mandrel dental handpiece latch-type long automatic clutch 2s
TXT
묘사:
Dental Handpiece Mandrel
MRC:
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.AASL
Head Diameter:
Between 0.076 inches and 0.080 inches
MRC:
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.AAZE
Shank Diameter:
Between 0.090 inches and 0.091 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
0.870 inches
MRC:
The number of items contained in the unit package.AGUC
Unit Package Quantity:
2
MRC:
Indicates the type of container in which the item of supply is packaged.AGXZ
Unit Package Type:
Any acceptable
MRC:
The designation derived from the name of the designer or use for which the item is intended.ANEH
Design Designation:
Friction
MRC:
Indicates the design type of the item.APGF
Design Type:
Slotted
MRC:
Indicates the type of handpiece for which the item is designed to be used.CBJZ
Handpiece Type For Which Designed:
Angle
MRC:
The measured weight of the exterior container.ECWT
Exterior Container Weight:
48.00 pounds
MRC:
A measurement of volume taken by multiplying the length by the width by the height of the exterior container and rendered in cubic units.EXME
Exterior Container Cubic Measure:
1.334 cubic feet
MRC:
The number of units of issue placed inside the exterior container.EXQT
Exterior Container Quantity:
48
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Latch type; long; automatic clutch; pin driving type head; for holding and driving thread-forming pin into pin hole in dentin of teeth for retention of restorations in the thread-forming screw technique; shaft relieved to prevent engagement by handpiece chuck; cone shaped contact area provides clutch action
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, corrosion resisting
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel
MRC:
The number of wraps,boxes,or bundles,which contains two or more units of issue,placed inside an exterior container.PKQT
Intermediate Package Quantity:
12
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
MRC:
A measurement of volume taken by multiplying the length by the width by the height of the unit of issue and rendered in cubic units.SUCB
Unit Of Issue Cube:
0.010 cubic feet
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
FORU-SE-W/C-ONTR
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects a surface.SURF
Surface Treatment:
Passivated
MRC:
The measured weight of the actual container(s) or supporting device(s) which is in direct contact with the item and its contents.SUWT
Unit Of Issue Weight:
0.13 pounds
