부품 정보
Terminals are 0.750 in. Apart c to c; ring is 0.312 in. Thk w/2.250 in. Id
TXT
묘사:
Nonim Electrical Heating Element
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Single heat ring
MRC:
The number of terminals for providing electrical connection to the item.AARA
Terminal Quantity:
2
MRC:
The length of that portion of the heating element that imparts heat.ABHS
Effective Heating Length:
4.625 inches
MRC:
An indication of the radiation spectrum of the element.ABJA
Element Radiation Specificationtrum:
Noninfrared
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the element connection.ABJS
Element Connection Style:
Hermetically sealed stud
MRC:
A measurement of the longest dimension of a terminal,in distinction from width.ABJT
Terminal Length:
0.531 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
4.625 inches
MRC:
The number of heats at which the item will operate.ABNR
Heat Quantity:
1
MRC:
The heat output of the heated portion of the surface area of the heating element.ABNS
Watt Density Rating:
14.0 per square inch single voltage
MRC:
The maximum rated power that an item can safely consume or provide,measured in watts.AZQH
Maximum Wattage Rating In Watts:
450.0 single voltage
MRC:
The number of elements in the item.BHHK
Element Quantity:
1
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.019 inches stud
MRC:
The number of threads per specific measurement scale.CQRN
Thread Quantity:
32 per inch stud
MRC:
The total electrical voltage,expressed in volts,and the type of current whether alternating or direct.CSBH
Voltage In Volts And Current Type:
120.0 ac single voltage
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel sheath
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unf stud
