부품 정보
0.065 in. Min 0.072 in. Maximum diameter hole drilled through second step on center line 0.130 in. Min 0.140 in. Maximum lg from chamfered end, solid film lubricant/molykote/ on shoulder
TXT
묘사:
Headed Shoulder Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat chamfer
Under Head Length:
2.090 inches
First Step Diameter:
Between 0.3115 inches and 0.3119 inches
First Step Length:
Between 1.860 inches and 1.880 inches
Second Step Diameter:
Between 0.302 inches and 0.307 inches
Second Step Length:
Between 0.210 inches and 0.230 inches
First End Taper Length:
Between 0.010 inches and 0.020 inches
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
39.0 rockwell c and 49.0 rockwell c
First End Taper Angle:
45.0 degrees
Pin Head Diameter:
0.625 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches shoulder end
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
0.080 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 420
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-763 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Nickel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-c-26074 cl2 grb military specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Shoulder
