부품 정보
Inavy: wirerope assembly
TXT
묘사:
Single Leg Wire Rope Assembly
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
0.458 feet
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
0.093 inches rope
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Ecs misc; fa-18 hornet
MRC:
The means in which filaments are laid into strands or strands into rope or like items.AJXH
Lay Method:
Right regular outer layer
MRC:
Indicates the type of end.APTD
End Type:
Loop both ends
MRC:
The means used for retaining a loop.BWCM
Loop Retention Method:
Swage
MRC:
The measured load required to break the item in tension.BZQQ
Breaking Strength:
920.0 pounds
MRC:
The structural characteristic of the core.CTXX
Core Construction:
Wire
MRC:
The prefabrication form of the item.CTXY
Prefabrication Form:
Preformed
MRC:
A specified test load which the item must withstand without damage.CWKS
Proof Test Load:
736.000 pounds
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Copper swaging sleeve p/n= 9m306, nsn=4030-00-137-0028; zincor tin coating; fully lubricated; preferred color is black; other colors per m23053 acceptable also; l3 loop fits a 0.1875 inch diameter pin; l4 loop fits a 0.2500 inch diameter pin.
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel wire rope
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-w-83420 military standard single material response wire rope
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Tin or zinc
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
7 x 7
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
1st end loop fits 0.1875 inch diameter pin; 2nd end loop fits .02500 inch diameter pin
