TXT
묘사:
Engine Poppet Valve
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat
MRC:
A measurement from the bottom to the top of the head,in distinction from depth.AASU
Head Height:
0.1910 inches
MRC:
The measurement of the chamfer angle,expressed in degrees.AATE
Chamfer Angle In Deg:
45.0
MRC:
A measurement of the longest dimension of the chamfer,in distinction from width.AAZP
Chamfer Length:
0.0150 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 1.7990 inches and 1.8090 inches
MRC:
The angle of the end surface upon which the mated surface seats,expressed in degrees.AJFY
Seat Angle In Deg:
45.0
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the stem.ALYX
Stem Style:
Double grooved
MRC:
An indication of whether or not a groove for relief of carbon accumulation is included.ALYZ
Carbon Relief Groove:
Not included
Neck Radius:
0.4380 inches
MRC:
A measurement of the longest dimension of a stem,in distinction from width.ALZD
Stem Length:
Between 5.5545 inches and 5.5695 inches
Stem Diameter:
Between 0.3710 inches and 0.3720 inches
First Groove Diameter:
Between 0.3020 inches and 0.3080 inches
Second Groove Diameter:
Between 0.3020 inches and 0.3080 inches
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Steel, vms216 or sae 3140, tip
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Steel, vms201 or sae 21-4n, head
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Steel, vms201 or sae21-4, stem
MRC:
A numeric value,used in conjunction with a hardness rating scale,designating the metallic hardness rating and its location.ASXJ
Metallic Hardness Rating And Location:
32.0 rockwell c head err-100
MRC:
A numeric value,used in conjunction with a hardness rating scale,designating the metallic hardness rating and its location.ASXJ
Metallic Hardness Rating And Location:
32.0 rockwell c stem err-100
MRC:
A numeric value,used in conjunction with a hardness rating scale,designating the metallic hardness rating and its location.ASXJ
Metallic Hardness Rating And Location:
83.0 rockwell superficial 15-n tip err-100
MRC:
A numeric value,used in conjunction with a hardness rating scale,designating the metallic hardness rating and its location.ASXJ
Metallic Hardness Rating And Location:
87.0 rockwell superficial 15-n tip err-100
MRC:
A numeric value,used in conjunction with a hardness rating scale,designating the metallic hardness rating and its location.ASXJ
Metallic Hardness Rating And Location:
32.0 rockwell c head
MRC:
A numeric value,used in conjunction with a hardness rating scale,designating the metallic hardness rating and its location.ASXJ
Metallic Hardness Rating And Location:
32.0 rockwell c stem
MRC:
A numeric value,used in conjunction with a hardness rating scale,designating the metallic hardness rating and its location.ASXJ
Metallic Hardness Rating And Location:
87.0 rockwell superficial 15-n tip
MRC:
A numeric value,used in conjunction with a hardness rating scale,designating the metallic hardness rating and its location.ASXJ
Metallic Hardness Rating And Location:
83.0 rockwell superficial 15-n tip
