부품 정보
Weapon system essential
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 3.719 inches and 3.781 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
Between 0.378 inches and 0.385 inches
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
8
MRC:
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.ADGA
Overall Outside Diameter:
Between 13.965 inches and 13.975 inches
MRC:
The length of a straight line which passes through the center of the center hole,and terminates at the circumference.ADYT
Center Hole Diameter:
Between 5.875 inches and 5.879 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Combat system support equipment. 6x6 5-ton dump truck (m929, m930). 6x6 xl wb w/e 5-ton dump truck. 6x6 xl wb w/e 5-ton cargo truck. 5-ton tractor truck (m818, m931). 6x6 5-ton dropside cargo truck (m813a1, m-923, m-925).
MRC:
The spacing between the mounting holes.ALXY
Mounting Hole Spacing:
Eually spaced on 7.251 in. Bolt circle
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Steel, sae 1010 and steel, sae 1015
MRC:
Indicates the braking surface location on the item.AYPQ
Braking Surface Location:
Internal
MRC:
The length of a straight line which passes through the center of the braking surface,and terminates at the circumference.AYQA
Braking Surface Diameter:
Between 13.385 inches and 13.410 inches
MRC:
The measurement taken at right angles to the length of the braking surface,in distinction from thickness.AYQB
Braking Surface Width:
3.063 inches
MRC:
An indication of whether or not a cooling fin/s/ is included.AYQF
Cooling Fin:
Not included
MRC:
An indication of whether or not an adjustment hole is included.AYQH
Adjustment Hole:
Not included
MRC:
An indication of whether or not an inspection hole is included.AYQJ
Inspection Hole:
Not included
MRC:
An indication of whether or not an oil drain hole is included.AYQK
Oil Drain Hole:
Not included
MRC:
An indication of whether or not a balancing pad(s) is included.AYQL
Balancing Pad:
Not included
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Feat
