TXT
묘사:
Nonmetallic Grommet
MRC:
A measurement taken at right angles to the length of a groove,in distinction from thickness.ABGF
Groove Width:
Between 0.062 inches and 0.078 inches
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
0.125 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
Between 0.250 inches and 0.374 inches
MRC:
A measurement taken at right angles to the length of a hole,in distinction from thickness.ADEP
Hole Width:
0.172 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the grommet.AGME
Grommet Style:
Round
Large Flange Outside Diameter:
0.547 inches
Groove Outside Diameter:
0.375 inches
MRC:
A measurement of the longest dimension of a hole,in distinction from width.AGMK
Hole Length:
0.234 inches
MRC:
Indicates the type of design used in constructing the grommet.AGMU
Grommet Construction Type:
Split
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
Any acceptable
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber butadiene-acrylonitrile class nbr
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-r-7362, type 2 military specification single material response
