TXT
묘사:
Headed Grooved Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.1860 inches and 0.1865 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
Between 0.385 inches and 0.405 inches
Undercut Diameter:
Between 0.120 inches and 0.130 inches
Under Head Length:
Between 0.490 inches and 0.510 inches
Undercut Width:
Between 0.040 inches and 0.050 inches
First End Taper Length:
Between 0.010 inches and 0.030 inches
First End Taper Angle:
45.0 degrees
Pin Head Diameter:
0.250 inches
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Abmz
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.040 inches and 0.060 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 347
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove
